Distribution & Power Transformers

Distribution & Power Transformer Transformer are manufactured with standard rating & customer requirement, Bharati's Transformer are designed & tested as per IS2026.

Bharti's Transformer are manufactured with standard rating & customer requirement, Bharti's Transformer are designed & tested as per IS2026. Our transformers are durable low capacitive, power saver and highly official.


Product Range of Distribution & Power Transformer:.

• High value of coupling capacitance.
• Maximum leakage of magnetic field.
• Leakage current
• Static transformers of electric noise.

Transformer Design Options:

• Single Phase / Three Phase
• Indoor | Outdoor
• Pole mounted / Ground Mounted
• Conventional type / Hermetical Fealed type
• Conventional Radiator / Corrugated Radiator
• Copper / Aluminum Wound
• Fitting Accessories as Per Requirement

Construction:

1. Core: Core is made from best grade imported cold rolled grain oriented silicon steel lamination. Laminations are cut at an angle of 45 degree Celsius. Interleaved & mitered joints reduce the core losses & magnetizing current. Core is clamped with steel channel rigidly to reduce the cartile sound level.

2. Winding: Windings are designed to optimize dynamic, thermal Mechanical & Electrical strives depending upon the current & voltage requirement. The coils are wound with electrolytic grade high conductivity annealed wire & stripe covered with high quality insulation. Colling ducts are provided between windings & oil to minimize hot spot temperature & temp. gradient.

3. Insulation & Oil: Insulation material like pre compressed board, bakelite, tube, insulating top, varnish, epoxy/porcelains bushing etc are used of best quality to ensure long life of transformers. Oil is used as a coolant conforms IS 335 is centrifuged & filtered before filling into the transformer to ensure free from dust & moisture.

 

4. Tanks & Radiator: All tanks are assembled by cold/hot rolled steel plates through welding. They are equipped with radiator corrugated steel sheets in accordance with capacity.

 

5. Paint: Interior & Exterior surface are cleaned by chemical & coated with red oxide & 2 final coat of paint outside of tank body is coated for better & long life.


6. Temperature Rise: Designed for maximum temp rise at full rated load, 40-50 degree Celsius for Aluminum wound & 45-55 degree Celsius for copper wound transform.


After Sales Service:

Every Equipment sold is backed by our excellent & prompt service network. Our organization is well known by virtue of strong support in terms of pre sale & after sales rendered by us during any solutions.

We follow market leading techniques and effectively manufacture and supply a wide range of Power Distribution Transformers. They are very popular and are randomly utilized between the generating equipment and the power line(s), so as to increase the transmission voltage (to high voltage) and decrease the transmission current.

 

They are used for various purposes:

• Electricity Board

• Industrial Purpose

• Domestic Transformers

• Consumer Transformers

• Wind Mill Power Transmission

 

Our product range is given below:

 

• Up to 100 KVA, 1-Phase, 11 KV or below

• Up to 3000 KVA 11 & 33KV

• Up to 3000 KVA OLTC, 33KVOR Below

 

We also contain a variety of transformer design options as follows:

 

• Single Phase or Three Phase

• Indoor or Outdoor

• Pole mounted or Ground Mounted

• Conventional type or Hermetical Field type

• Conventional Radiator or Corrugated Radiator

• Copper or Aluminum Wound

• Fitting Accessories as Per Requirement